Techne Clipper — $49 + FREE Buss Comp.

Try the Free Demo

Techne Clipper
Changelog

Version 1.1.3, 31 October 2026. 4 releases.

1.1.3

Latest #
  • Fixed: in Studio Pro 8.2 on a Mac with an external display at its native resolution, the editor drew at half size in the top-left corner of its window, with the controls unreachable. Studio Pro creates the plugin window on the MacBook's Retina screen before moving it to the external display, and the plugin's graphics layer kept the Retina scale. The plugin now re-checks the display scale whenever its window changes screen, and every frame. Reproduced on a 5120×2160 display at "More Space". Live, Logic, Bitwig and REAPER open the window on its final screen and were never affected.
  • Fixed: in Studio Pro, clicking a button right after dragging a control could land on that control instead, because the host sends the plugin no pointer movement between clicks. A click now carries its own position.

1.1.2

#
  • Fixed: in Cubase 15, and any host that reads a control back from the plugin the moment you release it, switches flipped back, presets loaded without changing anything and knobs snapped back on release, while the audio went on untouched. The plugin now answers the host with the value you just set. Reported on Windows 11; Live, Bitwig and REAPER were never affected.
  • Fixed: BYPASS is now the plugin's host bypass as well, so the bypass button on a Cubase insert slot (and Live's device switch, Bitwig's) drives it.
  • Fixed: Cubase unloads a plugin the moment its last instance is removed, and a thread of ours still running there could take the host down a few seconds later. The plugin now stays loaded for the session, as every other host keeps it anyway.
  • Fixed: LUNA could crash when the plugin was powered off and back on from its window while audio was running. The host re-activates the plugin while one of its audio threads is still inside a process call, and the two met over the audio buffers. Activation now waits for that call to finish.

1.1.1

#
  • Fixed: the Audio Unit offered itself only on stereo tracks, so Logic Pro and GarageBand left it out of a mono track's plug-in menu. It now loads on a mono track too, mono in and mono out. VST3 and CLAP were never affected.

1.1.0

#

The first paid release. In short:

  • A new editor, HISTORY: the level history is the instrument, with a frequency lane under it, one bar of dials and ADVANCED for the rest. Dragging the window's edge scales the whole editor.
  • An Audio Unit, for Logic Pro and GarageBand, beside VST3 and CLAP.
  • THRESHOLD is the one "how hard" control. DRIVE became EDGE, a tilt into the clip with no gain, and LINK is on in a new instance, so the level holds while you set how much is clipped.
  • SPECTRAL grew up: the channels linked (the stereo image stays put), the same analysis at every sample rate, RELEASE that follows the tempo, ATTACK in milliseconds, DEPTH per region, a sub-bass fix, the DETECTOR view and ADAPT's band SCALE.
Full notesHide full notes
  • Compare honestly: MATCH (a loudness-matched bypass), the level history in dB with what was REMOVED, a picture that holds when playback stops (FREEZE, and a hover card that reads IN, OUT and GR at any column), CHANGE (what the clip did to each frequency, measured), held OUT and true-peak maxima, three factory presets.
  • Dozens of fixes, among them a CLAP project that can no longer take the host down.
  • A demo with every feature and no time limit: after the first clean minute, 5 s of silence every minute until it is activated.

The first public release. The notes below are the development history since the internal 1.0.0 build; nothing earlier reached customers.

Known in this version, as in the Tube: GarageBand's out-of-process hosting keeps space and letters in the plug-in once it has been clicked, and Return after a typed value restarts the song there. Other hosts are unaffected.

From a DSP audit, late in the cycle. With the knobs still, CLIP renders bit for bit as before and BANDS differs by −64 dB; SPECTRAL is bit for bit on mono and identical channels at 44.1 / 48 kHz, and changes on purpose otherwise (the link and the windows, below).

  • BANDS' crossover runs in double precision. In single precision its rounding came out of the bands' sum at −82 dB re the signal at 4× and −71 dB at 8×, with nothing clipped; it is under −140 dB now. BANDS costs about 15 % more CPU (1.8 % of a core at 48 kHz).

  • Under LINK, moving THRESHOLD no longer dips the level or over-limits. OUTPUT (LINK's makeup with it) and the wall's ceiling now reach the clipped audio at the same moment as the THRESHOLD it was clipped at. The CATCH also judges each sample against the ceiling in force when it arrived. A 9 dB THRESHOLD step dipped the level 2.5 dB or limited it 1.2 dB too deep; both are now within 0.25 dB.

  • SPLIT, TRANSCODER, PUNCH, SHAPE, SYMMETRY and the band SHAPEs move in steps of 64 samples under automation instead of once per host buffer. The band DRIVEs move every sample. A SPLIT sweep's zipper fell from −29 to −55 dB re the signal, and TRANSCODER's and PUNCH's from about −50 to −78 dB.

  • A host buffer longer than the host promised is processed in parts. BYPASS played silence past the promised length, and GR and the scope read zeros there.

  • AA at 1× runs at 2×. ADAA at the base rate is a two-sample average: 1× + AA was 7.2 dB down at 16 kHz and 17.8 dB at 20 kHz, with nothing clipped. At 2× it is within 0.6 / 1.3 dB, and it aliases 31 dB less (a 10 kHz sine 12 dB over). The latency is the 2× path's: 34 samples more at 48 kHz. 1× with AA off is unchanged.

  • SPECTRAL's WINDOW defaults to 512 in a new instance (was 1024): with the channels linked it keeps a hit's edge on dance material better than 1024 with 512 HITS. Saved projects and the factory presets keep their WINDOW.

  • A NaN can no longer latch SPECTRAL's ADAPT. The engine's input guard already kept the host's NaNs out.

  • SPECTRAL links the channels. A bin is turned down by the same amount in L and R, taken from whichever channel needs more; a frame is a hit when either channel's flux says so; ADAPT, the smoothing and the 512 HITS cross-fade are one for both. A centred tone beside a hard-left one used to move 4–6 dB toward the right, and a centred kick and bass with a hard-left part moved up to 3.8 dB; both now stay put. Nothing is detected from L + R, so opposite-phase material is held as before. Mono and identical channels render bit for bit as before; stereo material with different channels sounds different.

  • SPECTRAL's WINDOW is a duration. 512 / 1024 / 2048 (and 512 HITS) are their sample counts at 44.1 / 48 kHz; at 88.2 / 96 kHz the windows take twice the samples and at 176.4 / 192 kHz four times, so the analysis, the bins and the latency in ms are the same at any rate. At 192 kHz a 1024 window used to be 5.3 ms with 188 Hz bins, and a 40 Hz sine went 7 dB past the bins (the wideband clipper hard-clipped the rest); it now behaves as at 48 kHz. SPECTRAL's latency at 96 / 192 kHz grows by ×2 / ×4 in samples (the same ms as at 48 kHz). 44.1 / 48 kHz are unchanged.

  • The demo goes quiet instead of noisy: until it is activated, the output drops out for 5 s every minute after the first clean minute (was 2 s of noise at −18 dBFS every 30 s), with 10 ms ramps so no edge clicks. Everything else still works without a time limit.

  • SPECTRAL's RELEASE can follow the host tempo: SYNC chips in DYNAMICS' title row (OFF · 1/32 · 1/16 · 1/8 · 1/4). With a division on, a bin's gain is back by the next one, so reductions don't stack into a pump; the dial rests and reads the division and its length ("1/8 · 250 ms" at 120 BPM), following tempo changes live. The dial itself runs to 1000 ms (was 500), so a synced 1/4 at 60 BPM has a manual twin; its skew changed with it, so a host automation lane on it remaps. Saved with presets and projects; older files open with SYNC off.

  • DRIVE is now EDGE: the 600 Hz tilt into the clip alone (0–6 dB, highs up and lows down by that much), no gain. DRIVE's gain was the same push as lowering THRESHOLD (under LINK the two nulled), so the board had two dials for "how hard"; THRESHOLD is now the one, and a new instance starts with LINK on, so moving it changes how much is clipped, not how loud. 128 Techno Master keeps its sound (THRESHOLD −7.4, EDGE 1.55). The parameter keeps its id; a project that used DRIVE clips less.

  • HISTORY, the new editor (it replaces the 1.0 editor): the level history over most of the board with the meter bank on its axis, each hit's GR peak printed over its notch and the LUFS S line through it; a frequency lane under it in every engine (CLIP's CHANGE; BANDS' spectra with a DRIVE pill a band; SPECTRAL's DETECTOR, ADAPT and CHANGE with a DEPTH pill a region and TILT's handle; the splits in both — every pill and handle drags, as a host gesture); a column of readings at the right; and one bar of dials under the screen whose middle group follows the engine (TRANSCODER · PUNCH · ATTACK · SUSTAIN in CLIP and BANDS, GATE · ATTACK · RELEASE · ADAPT in SPECTRAL). ADVANCED slides the rest out above the bar (BANDS' page; SPECTRAL's and TRANSIENT; the CATCH), saved with the project; COMPACT keeps the bar and a mini screen. The window scales the whole editor: a drag of its edge (or SCALE in SETTINGS) sets the size, the proportions kept. The light theme and the hover tooltips went with the 1.0 editor: the info line along HISTORY's foot names the control under the pointer, with its value and range.

  • The level history reads in dB (the top 6 dB as before, down to −48), REMOVED is the measured reduction standing on the clip's output, and the picture holds when playback stops (a new sound releases it; echoes and tails don't) — FREEZE in VIEW holds it by hand. While held or frozen, a hover card reads IN, OUT, GR and the gain at any column, with when. LEVEL is the default view; a saved project keeps its own.

  • CHANGE, the strip's third view in SPECTRAL (and the lane's picture in CLIP): what the clip stage did to each frequency over the last 0.3 s, measured from its input and output — CUT from the top, ADDED (new harmonics, fast gain moves) from the bottom, on one dB scale of the column's input.

  • SPECTRAL's ATTACK is in milliseconds (0–40). It was 0–8 STFT frames, whose length changed with WINDOW and the sample rate ("2.9 fr" was 4 ms at 512 and 16 at 2048); the engine now converts at the window in force, so a setting is the same time at any WINDOW. A preset or project from before reads its frames as ms (128 Techno Master's 1.5 is now 4 ms).

  • DEPTH per region is in the open: chips under DYNAMICS' title (ALL · LOW · L-MID · H-MID · HIGH) pick whose share the dial sets; clicking a region's name on the strip still does the same. DEPTH's tooltip, info line and the manual now say what it is: the share of each bin's reduction the spectral stage takes, the rest passing to the wideband clipper after it — a crossfade from spectral toward wideband clipping, not a dry mix; 0 % is CLIP through the STFT.

  • Switching the engine no longer moves the bank to the engine's page: the second tab relabels (BANDS / SPECTRAL) and the bank stays where it is, falling to MAIN only when CLIP, which has no such page, is picked while that page is open. The editor opens on MAIN.

  • CATCH RELEASE runs to 300 ms (was 30). With LINK off and CEILING under THRESHOLD the CATCH is a limiter proper, and there a long release is the cleaner setting. The dial is skewed so 0.5–30 ms keep over half of it; a host automation lane on it remaps.

  • DETAIL is off in a new instance (it was on). With it on, the highs added back over the clip re-cross THRESHOLD and the CATCH limits them, so a first listen heard a clip plus limiting; the factory presets already had it off. Projects and presets keep what they saved.

  • TRANSCODER, PUNCH and CATCH RELEASE's tooltips and info lines say what is heard: TRANSCODER as less clipping at a level, PUNCH as the hit limited by the CATCH instead of clipped.

  • An Audio Unit (AUv2) on macOS: Logic Pro and GarageBand load the Clipper, installed by the pkg and by Techne Hub beside the VST3 and CLAP.

  • The lit screen follows a window drag: its face and glass went black while the window was being resized and came back when it stopped (both designs).

  • LINK lands the clipped peaks on CEILING. It used to add −THRESHOLD to OUTPUT, which put them at 0 dBFS, so with CEILING under 0 the CATCH after the clip was limiting on every hit (1–3 dB at −1 … −3 dBTP, and a −26 dB null against the corrected output). Now it adds CEILING − THRESHOLD and the CATCH only meets the clip's own overshoot (about 0.5 dB). Projects and the Peak Control presets with LINK on and CEILING under 0 lose that extra limiting and sit a fraction of a dB quieter.

  • A bug sweep (2026-10-05). Several fixes change how saved projects and presets sound; those are marked.

  • Sound:

    • Switching TP, OVERSAMPLING, AA or the engine and back within a few milliseconds (a fast A/B, automation) could leave the output silent until the next such switch. A second switch during a restart no longer jumps back to full level either.
    • TRUE PEAK at 352.8 and 384 kHz no longer crashes the host.
    • SUSTAIN works: it did nothing before. Positive fills a hit's tail, negative tightens it, a held note is left alone. ATTACK no longer lifts held notes (about 2 dB at 100 %) and acts on onsets only. Projects and presets using ATTACK or SUSTAIN sound different (128 Techno Master among them).
    • Switching TP no longer clicks or replays old audio.
    • BYPASS is a 10 ms crossfade and never replays stale audio on the way in or out. The processing keeps running while bypassed, so BYPASS no longer saves CPU.
    • DELTA plays exactly what the processing removed in every engine: BANDS no longer carries the crossover's phase, SPECTRAL includes what the bins took, and ATTACK / SUSTAIN are inside it. Renders of DELTA change.
    • At 1× with AA on, the clip path ran one sample late, which combed DETAIL (−2.5 dB at 5 kHz with nothing clipped). The latency is one sample longer and the highs are back.
    • INPUT, EDGE, THRESHOLD, OUTPUT (with LINK's makeup) and CEILING glide across each buffer instead of stepping, so automation and knob moves no longer zipper. Static settings render exactly as before.
    • LOOK-AHEAD moves no longer click on small buffers or let peaks past the ceiling while they settle; a move landing during a restart takes effect.
    • Baking MATCH's gain into OUTPUT (a click on the gain) no longer dips the level for about a second. While bypassed the gain reads 0 and the click does nothing, so the held gain is never thrown away.
    • DETAIL switched in SPECTRAL crossfades instead of dropping out for 50 ms.
    • One NaN or infinite input sample no longer silences the output for good or freezes the meters and MATCH.
    • Dither: left and right get independent noise, and with WALL on the noise never takes a sample over CEILING.
    • With AA off, the oversampler lost 0.05 dB per 2× stage; it now passes level exactly.
  • SPECTRAL:

    • Under its ceiling SPECTRAL is now transparent. Its window left every frame (N−1)/N short (a −60 dB difference against the input at 1024) and the bins read as low; the periodic window it uses now is exact. Every SPECTRAL setting sounds very slightly different.
    • Coming back to SPECTRAL starts clean: old bin gains used to duck quiet material for up to half a second.
    • 512 HITS switched off or on mid-play no longer clicks or replays the last hit.
    • SHAPE's release is continuous across its range; the first fraction of a percent no longer jumps. Presets with SHAPE between 0 and 100 % release differently (128 Techno Master among them).
    • ADAPT with 512 HITS sounds the same at every buffer size, and very large offline buffers now match playback.
  • Presets, A / B and INIT:

    • A preset or A / B slot that doesn't name a setting gives it its documented default instead of keeping the previous preset's. The factory presets spell out every value (128 Techno Master: DEPTH 100 %, SCALE BARK, TP MARGIN 0.3 dB).
    • DELTA, SCOPE SYNC and the division are no longer stored in presets or A / B slots, and switching them no longer marks the preset edited.
    • A preset load or an A / B switch clears the band solos; INIT resets everything, monitoring included.
    • A preset file renamed in Finder (its file name no longer matching the name inside) loads, renames and deletes again. A failed load stays on screen and ‹ › steps past it.
    • A load sends only the settings that change, so a host that keeps an undo step per change records a handful, not about 60.
  • Host:

    • ENGINE, OVERSAMPLING, WINDOW, ADAPT SCALE, DITHER, TP MARGIN and SCOPE DIVISION show names in the host ("4×", "1024", "BARK") and accept typed names; automation lands where it did.
    • SYMMETRY, ATTACK and SUSTAIN no longer show "-0 %".
    • The editor reopens at its saved size and layout (COMPACT or expanded); windows saved by Clipper 1.0.0 are converted.
    • Projects from before TP MARGIN keep 0.1 dB in the parameter itself from the moment they load.
    • Two open Clipper editors no longer overwrite each other's settings.
  • Editor:

    • A typed value is committed before whatever you click next acts (a scope line, A / B, presets, another value), and a card opened while typing takes the keyboard.
    • GR HISTORY shows the clip + catch reduction like the GR readout, independent of OUTPUT, LINK and MATCH. With LINK on it used to show about 1 dB while clipping 12.
    • CEILING reads dBTP with TP on and dBFS otherwise, and is dimmed when nothing uses it (WALL, TP and LINK all off). OUTPUT shows LINK's makeup beside its own value, in amber.
    • Controls that do nothing in the current setting are dimmed: SHAPE and DETAIL in BANDS, 512 HITS at WINDOW 512 or with GATE off, SCALE with ADAPT off, the CATCH knobs with WALL off, the scope division with SYNC off.
    • OFF, FLAT and CURVE readouts switch exactly where the sound does.
    • BIN GR holds between frames and includes the 512 HITS path; the strip's region labels show their real reduction past 12 dB; the DETECTOR view never mixes two blocks; the BANDS strip has its own tooltip.
    • With no audio running, the scope redraws on its toggles, activation completes and the DEMO badge updates; the display no longer freezes while you type.
    • Every gesture the editor opens with the host closes: a knob, line or split whose release was lost (outside the window, the Windows size loop) stops following the pointer at the next click.
    • The footer's readouts refresh at a steady 10 Hz; the CUSTOM wave's hex field follows the WAVE choice; RESET UI SETTINGS resizes the window the way a SCALE change does.
    • Tooltips and the manual say what WALL (sample peaks) and TP (true peaks) each hold.
  • The screen is lit: the waveform sits in a window of deep Techne blue, lit softly from behind, its corners falling into shade; the grid and the labels are its white print, and the trace floats over the face on a soft shadow. The meters and the readouts stay on black, under one glass. SETTINGS → SCREEN: LIT (the default) or CLEAR, the black glass as before.

  • A matte finish: the control plate and the footer lit as solid surfaces with their edges following the rounded corners, deeper shadows under the knobs, and the screen set into a cut in the case instead of standing on it, with clear glass over the data.

  • CLAP: a damaged project no longer takes the host down with it — a state the plugin cannot read is refused — and after a project loads the host is told to read the parameters again, so its automation lanes and displays show the loaded values.

  • THRESHOLD's ring loses the small mark at the top of its scale (−30 dB, where no clipping threshold sits).

  • The editor opens COMPACT — the controls and a small screen, the full display one click away (EXPAND) — and remembers the layout with the project. The presets card fits the compact window: the tags scroll sideways on one row and the list takes the height that is left, so SAVE and LOAD are always in reach.

  • The finish: a brushed control plate, round caps with a mark at the start of their travel (the two-sided controls — SYMMETRY, ATTACK, SUSTAIN, INPUT, OUTPUT, TILT — a mark at their centre instead, and they fill from it), and every switch a shallow key with its own face, so a switch that is off still reads as something to press. Group titles in the ink with a short accent rule; values brighter, units quieter.

  • SETTINGS: CAP — THRESHOLD's cap colour (the house blue, the wave's colour, graphite, or any colour).

  • The scope draws the wave as one line through every column's two extremes in the order they happened, four columns a pixel, tied to the audio's own timeline: slow content is a thin line with exact peaks, content faster than the pixels packs into a solid block whose edge is the true envelope, and a hit keeps its shape as it scrolls. The comb-like attacks, the spikes every seventh pixel and the doubled contour are gone. A LEVEL switch in VIEW shows IN and OUT as peak envelopes with the reduction on top instead — the limiter-style history — kept with the project. The GR history's 20 ms hold is now measured in audio time at every window width.

  • The editor's art-direction pass: the knobs are shallow matte discs (one light from the upper left, a defined edge, a short contact shadow), THRESHOLD is the largest control with EDGE and CEILING a step over the rest, and CLIP · TRANSIENT · LEVEL sit on one control surface with a seam between them. Same controls, same order, same values and behaviour.

  • The material pass: the editor as one instrument under one light — a slate chassis with a fine grain, the control plate lifted off it with every page (MAIN, CATCH, BANDS, SPECTRAL) on it, the caps in sockets with tick marks and a glow under the value arc, THRESHOLD as a large blue cap with a graduated scale, rounded keys that go solid when engaged, the switches on a bezel band with the model name, DEMO as a lamp, the meters as LED ladders, and the display as a framed glass screen with a recess, a faint reflection, a bloomed trace, a scale in both halves and the line labels' values in the ink. THRESHOLD's cell sits on its own recessed panel; each group's title runs into a rule. The screen stays dark glass in the light theme. The scope's default wave colour is now orange; the previous grey and the accent blue are stock choices beside WHITE and CUSTOM, and a saved choice keeps its meaning. The IN meter is neutral, OUT takes the wave's colour. TECHNE_MATERIAL=current shows the editor as it was.

  • The reference-matching pass (the A4 display study measured against the editor at 2 ×): the caps are plain discs with one thin rim — no socket, no tick marks, no arc at rest (the arc shows only under the hand); THRESHOLD's cap a hair larger with a lit top edge and a bevelled bottom, its well square-bottomed and flush with the plate's edge, dark in both themes, with room over and under the graduations; the keys of the header and the footer 31 px tall with a bright top line, PRESETS a bordered key; the display's frame a fine rounded line with a shadow on the chassis and no black lip under the screen; the tabs sit on the plate; the footer band the study's height with a lit top edge; the readouts' units follow their values; CATCH's dials start at the left.

  • The scope's trace: the bloom a halo within three pixels, the contour 1.2 px.

  • Dark-theme materials: one light from the upper left — the control bank a shallow gradient with a fine top edge and a short shadow beneath, the knob faces a clear step above it with the rim lit toward the upper left, a quieter inactive track, and a restrained recessed edge on the scope. The light theme is unchanged.

  • THRESHOLD's ring is a meter: 24 nodes light up to the level entering the clipper, on the knob's own scale — pale blue below the threshold, amber past it, a lamp past 0 dBFS — with the threshold as a fixed tick in line with the cap's dot. In every engine: in SPECTRAL it shows the bin furthest over its own ceiling on THRESHOLD's scale. The audio is unchanged.

  • The SPECTRAL page in three groups on the plate, like BANDS: ANALYSIS (WINDOW, GATE, 512 HITS and the BIN GR reading), FREQUENCY (TILT, ADAPT, SCALE), DYNAMICS (ATTACK, RELEASE, SHAPE, DEPTH); its dials on the same line as BANDS', the page centred on the plate. Its selected keys are the house blue (they were lavender); its arcs, titles and the strip's curve a lighter blue. The small knobs' pointers are one cool off-white.

  • Light theme: THRESHOLD's scale marks and end numbers are readable on its dark well; the COMPACT mini screen has a dark frame.

  • TRANSCODER's label whole in a 940 px window.

  • COMPACT: the display folds away for a shorter window, a small scope with IN / OUT / GR and OUT MAX in the footer (a second footer row in narrow windows); EXPAND gives the window its size back. Same knobs, pages, engine and values in both. The footer's TECHNE CLIPPER name is gone (the header carries it).

  • The scope's transient heads: a burst faster than the columns (a kick's 180 Hz head at 1.95 ms a column) drew as a ladder with dark notches, because the contour joined column extremes that were boundary cuts, not peaks, and the pixel buckets unioned two columns into nearly every pixel. Pixels that hold most of a cycle now draw as the bars they are, at every scope height, and the contour breaks at them; the buckets partition the columns.

  • The BANDS page names each band by the same edges as the strip (20 Hz and 20 kHz at the ends; it said 40 Hz and 16 kHz). The bank's and the strip's scale numbers are a step darker in the light theme.

  • SPECTRAL sub-bass: the transient gate no longer fires on bass-note onsets or on steady bass with unresolved harmonics, and the 512 HITS hold no longer depends on the host's buffer size. Measured on kick + sub handoffs and F1–A2 riffs; the fundamental and the kick body are unchanged, the onset overshoot is gone.

  • DEPTH: how much of the bin attenuation SPECTRAL asks for is applied, 100 % = as before. Per region too: click a region's name on the strip and the knob sets that region's own depth.

  • The strip's DETECTOR view: the estimate each bin is judged by, the effective threshold (THRESHOLD × TILT × ADAPT), the overshoot above it and what the long path applied, on a log axis. Left of the dimmed edge nothing is measured.

  • TP MARGIN: 0.1 or 0.3 dB under CEILING for the true-peak stage; new instances use 0.3, old projects keep 0.1.

  • SCALE: ADAPT's band layout — BARK, MEL, ERB, LOG.

  • The TP stage detects with the BS.1770 interpolator and applies its gain at the base rate; its detector vectorizes (six stereo instances at 48 kHz / 256 from 85 % of the callback to 32 %).

  • GR and the scope compare aligned taps; the display contract is written down (docs/display-contract.md).

  • The finish: the meter bank keeps its IN / OUT / GR names at every height; the bank's numbers, the scope's amplitude numbers and the strip's frequency and level numbers one contrast step up (9 px, 45 %); a legend in the scope's lower left names what is drawn in each mark's own colour — IN, OUT (DELTA under DELTA), REMOVED where it is drawn, GR HISTORY with its 0–12 dB range; THRESHOLD's name and value one step up and in the ink; the SPECTRAL strip's HITS / GATE status has its own place before the view selector; the line labels' plate is near opaque so CEILING stays readable inside the reduction band.

  • The display, an art-direction pass: a vertical IN / OUT / GR meter bank beside the scope, aligned to its 0 dB lines, with held peaks, the OUT maximum as its own mark and GR on a 0–12 dB scale; the footer in a reading order (GR largest, CATCH quiet until it works, LUFS S and I named apart, IN and the maxima under the bank), units quieter than values, a dash where nothing has been measured and −∞ for silence, numbers refreshed at 10 Hz beside fluid bars; the waveform lighter (a 1 px contour over a 14 % body, the input at 10 %), the grid quieter, the GR numbers out of the scope's gutter; THRESHOLD and CEILING read on one plate when they coincide instead of at opposite edges.

  • Three factory presets built on SPECTRAL as a peak controller (THRESHOLD down, no EDGE, LINK makes the level up, DETAIL off, ADAPT 0, TP on): Drum Bus, Mix Bus and Sub Heavy Peak Control. Measured at equal loudness against the dry the drum loop keeps its kick within 0.15 dB and its sub within 0.1; the mix stays within 0.5 dB in every band.

  • MATCH in the header: a loudness-matched bypass. The output rides a slow gain that holds its short-term loudness at the input's, so BYPASS compares the processing at equal loudness; the gain reads beside the switch and a click on it bakes it into OUTPUT. Held while bypassed; off under DELTA; switching it resets OUT MAX / TRUE PK MAX. Off, the audio is byte-identical to before.

  • OUT MAX and TRUE PK MAX hold the largest peak since the last reset, with the editor closed too; click to reset; switching TP resets them. LUFS click restarts the integrated measurement only.

  • The activation card: DEMO as a small amber badge, labels above the fields, red only for an activation that failed.

  • The CUSTOM wave color typed as hex is kept exactly. The default wave is a plain gray; the input trace is a soft envelope, the output the one crisp line.

  • The visual pass: neutral grounds, flat knobs, borderless controls.

  • Windows: the editor opens at the right scale in Live (Auto-Scale), Reaper and Bitwig; header segments never wrap.

Every plugin's changelog →