Techne Clipper — $49 + FREE Buss Comp.

Try the Free Demo

Plugin changelog

What changed in each plugin, newest first. Update from Techne Hub, or download the latest below.

Techne Tube 1.3.5

Latest #

The Tube on Linux, in beta: the CLAP and the VST3 for x86_64, in a tarball with an install script (CLAP to ~/.clap, VST3 to ~/.vst3). It needs glibc 2.35 or newer: Ubuntu 22.04 and later, Arch, Fedora 36 and later. Activate it with your Techne account or key, as on macOS and Windows. The macOS and Windows builds are as in 1.3.4.

Techne Buss Comp 1.0.0

Latest #

The first release: two compressors — the VCA, the classic console bus compressor modeled as its circuit, and Airwindows Logical4, ported statement for statement (bit-exact against the reference at 44.1, 48 and 96 kHz) — with the Techne facilities around them: a detector high-pass, a trim, MATCH, a 10 ms bypass crossfade, the gain-reduction history on the screen, presets, A/B — in the family's design.

Full notesHide full notes
  • ENGINE: VCA | LOGICAL4, the VCA for a new instance. The VCA is the console bus compressor's side chain as a circuit, not a sound-alike: one timing capacitor charged through the ATTACK resistor and drained through the RELEASE one, a detector that reads the compressed signal, both channels on one node so one gain moves the pair. THRESHOLD is in dBFS (−40 … 0, the dial of the software model below, 1 dB for 1 dB: a steady tone starts to be compressed at 4:1 just over it), RATIO 2:1 / 4:1 / 10:1, ATTACK 0.01 … 30 ms, RELEASE 0.1 … 1.2 s and AUTO. Its constants are fitted, sample by sample, to the gain a long-standing software model of that compressor applies on an analog unit's own calibration signals, and checked against it at all 27 settings fitted (the 0.01 ms attack and the 0.4 and 0.8 s releases, steps the analog unit does not have, among them): 0.02 dB apart on average; releases (AUTO's two speeds included) within 1 %; the 4:1 attacks within 9 % to 63 % (18 % to 90 % at 0.3 ms), 2:1's 9–54 % fast, 10:1's at 30 ms 23 % fast and at 0.1 ms 25 % slow, its last tenth landing a carrier peak late (2.5×); steady depths within 0.1 dB except 2:1 at 30 ms (0.4 dB light); the static curves within 0.02 dB. The same law fitted to the analog unit's measured traces stays in the code as the reference it is checked against. No latency, no oversampling. MAKEUP, MIX, SC HPF, OUTPUT and COLOR are shared; Logical4 keeps its own THRESHOLD, RATIO, SPEED and the attack / release split. A switch crossfades over 10 ms into the other engine, which has been running underneath, so it comes in at its own level. The host lists Logical4's parameters as L4 Threshold, L4 Ratio, L4 Speed, L4 Attack/Release and L4 Release (their ids are unchanged). A session, a preset or a SET AS DEFAULT file saved by an earlier build opens on LOGICAL4, as it sounded; four VCA presets join the factory set, with Glue Drums and Gel Master.
  • COLOR: the Tube's harmonics circuit as a third section. EVEN and ODD set the amount of each order; PRE puts it before the compressor (which then reacts to the harmonics), off it sits after MIX. The level is kept, so the dials change the harmonics, not the loudness. On by default, gently (EVEN 12 %, ODD 13 %); the LOGICAL4 preset is the exact skip. The curve is anti-aliased in closed form and follows the level, so quiet material and tails come out cleaner. A 2× key oversamples it through the family's half-band (90 dB) for hot, bright material at high amounts, at 35 samples of latency the host compensates; off, the default, there is no latency. (rc2's key told the host 0 at every activation and 35 a block later; Live restarts a plugin whose latency changes, so with the key on it restarted every few blocks — crunching and dropouts. The latency is now the key's from the activation on.) Under 2× everything is as late as the host is told: with EVEN and ODD at 0 rc2 passed the audio through undelayed, and BYPASS faded to the undelayed input — both 35 samples ahead of the compensation; now both wait.
  • PORTRAIT, after a look at it in a host: ANALYSIS is the meter's (a display bar under the glass, at the right), not a key beside ENGINE; THRESHOLD shows its position as the other dials do, a blue arc, with the input's nodes around it amber past the pointer; RATIO's detents are numbered (2 · 4 · 10, WIDE too); the meter's marks stand evenly spaced (0 1 2 3 4 6 8 10 15 20); SETTINGS → METER gives the dial the backlit face too; the 2× key dips the output for about 12 ms around its switch instead of tearing (and a host that restarts the plugin for the new latency gets it back from silence).
  • COLOR has its own switch: the lamp key in its title row (WIDE), ON beside its heading (PORTRAIT). Off passes the compressor's signal untouched and keeps EVEN, ODD, PRE and 2× as they were, with a 10 ms crossfade; on by default, and every session and preset from before the switch opens on.
  • EXT SC: the VCA can be keyed from the host's sidechain input — a kick to pump a bus, a vocal to duck one. The key takes the program's place in the compressor's side chain, through SC HPF, at the same THRESHOLD, RATIO, ATTACK and RELEASE; THRESHOLD's ring shows the key's level, and with nothing routed the meter says NO KEY. Its key sits beside ENGINE, where A/R is under LOGICAL4 (Logical4 has no key input). Stereo and mono, in VST3, CLAP and AU (Logic's mono tracks included). A switch crossfades the two keys over 10 ms. Not saved in presets, A / B or SET AS DEFAULT: it's routing, like the host's own sidechain menu.
  • CLIP: a clipper at the end of the chain, after OUTPUT — the compressor glues a bus and leaves its peaks, and can lift them; CLIP stops them at CEILING (−24 … 0 dBFS, a sample ceiling, not true peak). The Clipper's curve with a soft knee at the host rate: no oversampling and no latency. On four bus-compressed drum loops peaking 3 dB over a −6 ceiling it held the peaks at −6.0 for 0.02 to 0.04 LU. PORTRAIT: CLIP's key under PRE | POST, its red lamp brighter as it bites, CEILING on a small dial with its value (click to type); WIDE: the key and the value at the end of LEVEL's row. Off for a new instance and in every earlier session and preset; presets, A / B and SET AS DEFAULT carry it.
  • The editor is PORTRAIT: a tall editor (460 × 764 at 100 %), built around the gain reduction — a needle meter the width of the faceplate on a scale that gives the first few dB room (0 1 2 3 4 6 8 10 15 20), the needle's reading as a large number on it, THRESHOLD the largest dial with RATIO, SC HPF, ATTACK and RELEASE beside it, LEVEL and COLOR on the same columns under them. ANALYSIS, under the meter, opens the screen (history, meters, loudness) under the controls and the window grows downward (on a Mac, a little smaller where the screen is short). An engaged key (MATCH, BYPASS, EXT SC, A/R, COLOR's ON and 2×) lights its lamp and sits a little lower, its face the panel's; BYPASS's lamp is red. Kept per machine; the parameters, presets and sessions are the same in both.
  • PORTRAIT's dials: a flat cap on a dark collar, the value a thin ring around it, ticks at each control's marks (a stepped control's at its positions) and its range's ends printed beside it; THRESHOLD prints its whole scale, every 10 dB. THRESHOLD's ticks are its input meter: lit as far as the input reaches, blue under the threshold, amber past it, the top one red over 0 dBFS; unlit, they are its scale.
  • SETTINGS → PLATE: DARK or CONSOLE GRAY — PORTRAIT on the family's graphite or on a console's light gray, its print dark, its keys and its meter window black. Kept per machine.
  • The activation card in the family's style: the state as a lamp (DEMO, LICENSED), the email and the key in labeled fields, CLOSE and ACTIVATE.
  • SETTINGS → TOOLTIPS: ON (the line at the foot names the control under the pointer, its value, range and what it does) or OFF (only how the editor is worked). Kept per machine.
  • RATIO ends at 9. Logical4 runs to 16, but its third stage's control rests at SPEED × its target, so past 9 at any SPEED short of the slowest the cells expand instead of compressing (a burst at −3 dBFS came out at +6.8, with the meter reading 0). Two stages are the product.
  • SC HPF is 80 Hz for a new instance. With it off, a 30 Hz sub at −6 dBFS put 6.5 dB of ripple on the gain within its own cycle; at 80 Hz it is 0.6. OFF is still Logical4 exactly, and the LOGICAL4 preset keeps it.
  • Fixed: after a burst into digital silence (a stopped transport, rendered silence between regions) the gain reduction held for ever — 5 dB on the readout beside NO SIGNAL — and the first transient after the gap met a stale cell on its negative half. Logical4's denormal guard feeds the cells a noise that is always positive, so only the positive side's controls ever let go. The guard now carries a sign; on any sample that is not exact silence the arithmetic is unchanged.
  • BYPASS is the host's bypass too (Live's device switch, a VST3 insert's bypass), so it takes the crossfade and the compressor keeps running underneath.
  • MATCH's gain and the loudness meters survive the host's reset (REAPER and the VST3 wrappers reset on every play), so an A/B with MATCH on no longer starts at unity and relevels over three seconds at each play press. RESET on the readouts still clears them.
  • OUTPUT is ±24 dB (was ±12): MATCH's gain reaches ±24, and baking it into OUTPUT clamped silently.
  • A session saved bypassed opens bypassed from its first sample (the crossfade used to start from the processed side).

Techne Reducer 1.0.0

Latest #

Named Reducer (2026-11-07; DeRez until then, nothing shipped under it): the DAW lists "Reducer" by Techne, the bundle is "Techne Reducer", the ids fm.techne.reducer / TechneReducer001 / AU Rduc. The engine is still Airwindows' DeRez4, credited as before.

The first release: Airwindows DeRez4 (Chris Johnson, MIT), ported statement for statement and bit-exact against the compiled original at 44.1, 48 and 96 kHz, with Techne's additions around it — and the pure DeRez4 signal is the starting state, bit for bit.

  • RATE, BRIGHT, BASSIS, OUTPUT: DeRez4's own four controls. RATE is shown as the capture rate at the current sample rate and steps in whole samples, as the original does; click its number to type a rate.
Full notesHide full notes
  • JITTER (the capture clock made unsteady), REACT (the crush follows the hits or the tails), GRID with GATE | ROAR and LOG (an amplitude grid, its steps even or on a μ-law curve), WIDE (the right channel on a clock of its own) and an inverting MIX: Techne's additions, all off at the start.
  • The editor: one portrait card in light or dark, the spectrum screen as the control (drag across for RATE, up for GRID), RATE's fader, the dials — a flat matte cap on a smooth collar, drawn as a turned part, the scale's ends printed and its ticks lit as far as the setting — the family's keys, preset browser, settings and activation cards; help as a line on the display.
  • A 10 ms bypass crossfade, presets with A/B, no latency.
  • VST3, CLAP and Audio Unit (AU code aufx / Rduc / Tchn).

Techne Tube 1.3.4

#

Audio Unit only; the VST3 and CLAP are as in 1.3.3.

  • Fixed: resizing the Audio Unit's window by its corner grip. In Live the window grew twice as far as the drag; it now follows the pointer, at the editor's own proportions.
  • Fixed: in Live the Audio Unit's window resizes while you drag, not only when you let go.
  • Fixed: a drag can no longer take the Audio Unit's window under the editor's smallest size or over its largest (GarageBand cut the editor off).
  • Fixed: the Audio Unit opens at the editor's own size in hosts that run it out of process.

Techne Clipper 1.1.3

Latest #
  • Fixed: in Studio Pro 8.2 on a Mac with an external display at its native resolution, the editor drew at half size in the top-left corner of its window, with the controls unreachable. Studio Pro creates the plugin window on the MacBook's Retina screen before moving it to the external display, and the plugin's graphics layer kept the Retina scale. The plugin now re-checks the display scale whenever its window changes screen, and every frame. Reproduced on a 5120×2160 display at "More Space". Live, Logic, Bitwig and REAPER open the window on its final screen and were never affected.
  • Fixed: in Studio Pro, clicking a button right after dragging a control could land on that control instead, because the host sends the plugin no pointer movement between clicks. A click now carries its own position.

Techne Tube 1.3.3

#
  • Fixed: in Studio Pro 8.2 on a Mac with an external display at its native resolution, the editor drew at half size in the top-left corner of its window, with the controls unreachable. Studio Pro creates the plugin window on the MacBook's Retina screen before moving it to the external display, and the plugin's graphics layer kept the Retina scale. The plugin now re-checks the display scale whenever its window changes screen, and every frame. Reproduced on a 5120×2160 display at "More Space". Live, Logic, Bitwig and REAPER open the window on its final screen and were never affected.
  • Fixed: in Studio Pro, clicking a button right after clicking the FIELD could move the FIELD's puck to a corner instead, because the host sends the plugin no pointer movement between clicks. A click now carries its own position.

Techne Clipper 1.1.2

#
  • Fixed: in Cubase 15, and any host that reads a control back from the plugin the moment you release it, switches flipped back, presets loaded without changing anything and knobs snapped back on release, while the audio went on untouched. The plugin now answers the host with the value you just set. Reported on Windows 11; Live, Bitwig and REAPER were never affected.
  • Fixed: BYPASS is now the plugin's host bypass as well, so the bypass button on a Cubase insert slot (and Live's device switch, Bitwig's) drives it.
  • Fixed: Cubase unloads a plugin the moment its last instance is removed, and a thread of ours still running there could take the host down a few seconds later. The plugin now stays loaded for the session, as every other host keeps it anyway.
  • Fixed: LUNA could crash when the plugin was powered off and back on from its window while audio was running. The host re-activates the plugin while one of its audio threads is still inside a process call, and the two met over the audio buffers. Activation now waits for that call to finish.

Techne Tube 1.3.2

#
  • Fixed: in Cubase 15, and any host that reads a control back from the plugin the moment you release it, switches flipped back, presets loaded without changing anything and knobs snapped back on release, while the audio went on untouched. The plugin now answers the host with the value you just set. Reported on Windows 11; Live, Bitwig and REAPER were never affected.
  • Fixed: BYPASS is now the plugin's host bypass as well, so the bypass button on a Cubase insert slot (and Live's device switch, Bitwig's) drives it.
  • Fixed: Cubase unloads a plugin the moment its last instance is removed, and a thread of ours still running there could take the host down a few seconds later. The plugin now stays loaded for the session, as every other host keeps it anyway.
  • Fixed: LUNA could crash when the plugin was powered off and back on from its window while audio was running. The host re-activates the plugin while one of its audio threads is still inside a process call, and the two met over the audio buffers. Activation now waits for that call to finish.

Techne Clipper 1.1.1

#
  • Fixed: the Audio Unit offered itself only on stereo tracks, so Logic Pro and GarageBand left it out of a mono track's plug-in menu. It now loads on a mono track too, mono in and mono out. VST3 and CLAP were never affected.

Techne Tube 1.3.1

#
  • Fixed: the Audio Unit offered itself only on stereo tracks, so Logic Pro and GarageBand left it out of a mono track's plug-in menu. It now loads on a mono track too, mono in and mono out. VST3 and CLAP were never affected.

Techne Clipper 1.1.0

#

The first paid release. In short:

  • A new editor, HISTORY: the level history is the instrument, with a frequency lane under it, one bar of dials and ADVANCED for the rest. Dragging the window's edge scales the whole editor.
  • An Audio Unit, for Logic Pro and GarageBand, beside VST3 and CLAP.
  • THRESHOLD is the one "how hard" control. DRIVE became EDGE, a tilt into the clip with no gain, and LINK is on in a new instance, so the level holds while you set how much is clipped.
  • SPECTRAL grew up: the channels linked (the stereo image stays put), the same analysis at every sample rate, RELEASE that follows the tempo, ATTACK in milliseconds, DEPTH per region, a sub-bass fix, the DETECTOR view and ADAPT's band SCALE.
Full notesHide full notes
  • Compare honestly: MATCH (a loudness-matched bypass), the level history in dB with what was REMOVED, a picture that holds when playback stops (FREEZE, and a hover card that reads IN, OUT and GR at any column), CHANGE (what the clip did to each frequency, measured), held OUT and true-peak maxima, three factory presets.
  • Dozens of fixes, among them a CLAP project that can no longer take the host down.
  • A demo with every feature and no time limit: after the first clean minute, 5 s of silence every minute until it is activated.

The first public release. The notes below are the development history since the internal 1.0.0 build; nothing earlier reached customers.

Known in this version, as in the Tube: GarageBand's out-of-process hosting keeps space and letters in the plug-in once it has been clicked, and Return after a typed value restarts the song there. Other hosts are unaffected.

From a DSP audit, late in the cycle. With the knobs still, CLIP renders bit for bit as before and BANDS differs by −64 dB; SPECTRAL is bit for bit on mono and identical channels at 44.1 / 48 kHz, and changes on purpose otherwise (the link and the windows, below).

  • BANDS' crossover runs in double precision. In single precision its rounding came out of the bands' sum at −82 dB re the signal at 4× and −71 dB at 8×, with nothing clipped; it is under −140 dB now. BANDS costs about 15 % more CPU (1.8 % of a core at 48 kHz).

  • Under LINK, moving THRESHOLD no longer dips the level or over-limits. OUTPUT (LINK's makeup with it) and the wall's ceiling now reach the clipped audio at the same moment as the THRESHOLD it was clipped at. The CATCH also judges each sample against the ceiling in force when it arrived. A 9 dB THRESHOLD step dipped the level 2.5 dB or limited it 1.2 dB too deep; both are now within 0.25 dB.

  • SPLIT, TRANSCODER, PUNCH, SHAPE, SYMMETRY and the band SHAPEs move in steps of 64 samples under automation instead of once per host buffer. The band DRIVEs move every sample. A SPLIT sweep's zipper fell from −29 to −55 dB re the signal, and TRANSCODER's and PUNCH's from about −50 to −78 dB.

  • A host buffer longer than the host promised is processed in parts. BYPASS played silence past the promised length, and GR and the scope read zeros there.

  • AA at 1× runs at 2×. ADAA at the base rate is a two-sample average: 1× + AA was 7.2 dB down at 16 kHz and 17.8 dB at 20 kHz, with nothing clipped. At 2× it is within 0.6 / 1.3 dB, and it aliases 31 dB less (a 10 kHz sine 12 dB over). The latency is the 2× path's: 34 samples more at 48 kHz. 1× with AA off is unchanged.

  • SPECTRAL's WINDOW defaults to 512 in a new instance (was 1024): with the channels linked it keeps a hit's edge on dance material better than 1024 with 512 HITS. Saved projects and the factory presets keep their WINDOW.

  • A NaN can no longer latch SPECTRAL's ADAPT. The engine's input guard already kept the host's NaNs out.

  • SPECTRAL links the channels. A bin is turned down by the same amount in L and R, taken from whichever channel needs more; a frame is a hit when either channel's flux says so; ADAPT, the smoothing and the 512 HITS cross-fade are one for both. A centred tone beside a hard-left one used to move 4–6 dB toward the right, and a centred kick and bass with a hard-left part moved up to 3.8 dB; both now stay put. Nothing is detected from L + R, so opposite-phase material is held as before. Mono and identical channels render bit for bit as before; stereo material with different channels sounds different.

  • SPECTRAL's WINDOW is a duration. 512 / 1024 / 2048 (and 512 HITS) are their sample counts at 44.1 / 48 kHz; at 88.2 / 96 kHz the windows take twice the samples and at 176.4 / 192 kHz four times, so the analysis, the bins and the latency in ms are the same at any rate. At 192 kHz a 1024 window used to be 5.3 ms with 188 Hz bins, and a 40 Hz sine went 7 dB past the bins (the wideband clipper hard-clipped the rest); it now behaves as at 48 kHz. SPECTRAL's latency at 96 / 192 kHz grows by ×2 / ×4 in samples (the same ms as at 48 kHz). 44.1 / 48 kHz are unchanged.

  • The demo goes quiet instead of noisy: until it is activated, the output drops out for 5 s every minute after the first clean minute (was 2 s of noise at −18 dBFS every 30 s), with 10 ms ramps so no edge clicks. Everything else still works without a time limit.

  • SPECTRAL's RELEASE can follow the host tempo: SYNC chips in DYNAMICS' title row (OFF · 1/32 · 1/16 · 1/8 · 1/4). With a division on, a bin's gain is back by the next one, so reductions don't stack into a pump; the dial rests and reads the division and its length ("1/8 · 250 ms" at 120 BPM), following tempo changes live. The dial itself runs to 1000 ms (was 500), so a synced 1/4 at 60 BPM has a manual twin; its skew changed with it, so a host automation lane on it remaps. Saved with presets and projects; older files open with SYNC off.

  • DRIVE is now EDGE: the 600 Hz tilt into the clip alone (0–6 dB, highs up and lows down by that much), no gain. DRIVE's gain was the same push as lowering THRESHOLD (under LINK the two nulled), so the board had two dials for "how hard"; THRESHOLD is now the one, and a new instance starts with LINK on, so moving it changes how much is clipped, not how loud. 128 Techno Master keeps its sound (THRESHOLD −7.4, EDGE 1.55). The parameter keeps its id; a project that used DRIVE clips less.

  • HISTORY, the new editor (it replaces the 1.0 editor): the level history over most of the board with the meter bank on its axis, each hit's GR peak printed over its notch and the LUFS S line through it; a frequency lane under it in every engine (CLIP's CHANGE; BANDS' spectra with a DRIVE pill a band; SPECTRAL's DETECTOR, ADAPT and CHANGE with a DEPTH pill a region and TILT's handle; the splits in both — every pill and handle drags, as a host gesture); a column of readings at the right; and one bar of dials under the screen whose middle group follows the engine (TRANSCODER · PUNCH · ATTACK · SUSTAIN in CLIP and BANDS, GATE · ATTACK · RELEASE · ADAPT in SPECTRAL). ADVANCED slides the rest out above the bar (BANDS' page; SPECTRAL's and TRANSIENT; the CATCH), saved with the project; COMPACT keeps the bar and a mini screen. The window scales the whole editor: a drag of its edge (or SCALE in SETTINGS) sets the size, the proportions kept. The light theme and the hover tooltips went with the 1.0 editor: the info line along HISTORY's foot names the control under the pointer, with its value and range.

  • The level history reads in dB (the top 6 dB as before, down to −48), REMOVED is the measured reduction standing on the clip's output, and the picture holds when playback stops (a new sound releases it; echoes and tails don't) — FREEZE in VIEW holds it by hand. While held or frozen, a hover card reads IN, OUT, GR and the gain at any column, with when. LEVEL is the default view; a saved project keeps its own.

  • CHANGE, the strip's third view in SPECTRAL (and the lane's picture in CLIP): what the clip stage did to each frequency over the last 0.3 s, measured from its input and output — CUT from the top, ADDED (new harmonics, fast gain moves) from the bottom, on one dB scale of the column's input.

  • SPECTRAL's ATTACK is in milliseconds (0–40). It was 0–8 STFT frames, whose length changed with WINDOW and the sample rate ("2.9 fr" was 4 ms at 512 and 16 at 2048); the engine now converts at the window in force, so a setting is the same time at any WINDOW. A preset or project from before reads its frames as ms (128 Techno Master's 1.5 is now 4 ms).

  • DEPTH per region is in the open: chips under DYNAMICS' title (ALL · LOW · L-MID · H-MID · HIGH) pick whose share the dial sets; clicking a region's name on the strip still does the same. DEPTH's tooltip, info line and the manual now say what it is: the share of each bin's reduction the spectral stage takes, the rest passing to the wideband clipper after it — a crossfade from spectral toward wideband clipping, not a dry mix; 0 % is CLIP through the STFT.

  • Switching the engine no longer moves the bank to the engine's page: the second tab relabels (BANDS / SPECTRAL) and the bank stays where it is, falling to MAIN only when CLIP, which has no such page, is picked while that page is open. The editor opens on MAIN.

  • CATCH RELEASE runs to 300 ms (was 30). With LINK off and CEILING under THRESHOLD the CATCH is a limiter proper, and there a long release is the cleaner setting. The dial is skewed so 0.5–30 ms keep over half of it; a host automation lane on it remaps.

  • DETAIL is off in a new instance (it was on). With it on, the highs added back over the clip re-cross THRESHOLD and the CATCH limits them, so a first listen heard a clip plus limiting; the factory presets already had it off. Projects and presets keep what they saved.

  • TRANSCODER, PUNCH and CATCH RELEASE's tooltips and info lines say what is heard: TRANSCODER as less clipping at a level, PUNCH as the hit limited by the CATCH instead of clipped.

  • An Audio Unit (AUv2) on macOS: Logic Pro and GarageBand load the Clipper, installed by the pkg and by Techne Hub beside the VST3 and CLAP.

  • The lit screen follows a window drag: its face and glass went black while the window was being resized and came back when it stopped (both designs).

  • LINK lands the clipped peaks on CEILING. It used to add −THRESHOLD to OUTPUT, which put them at 0 dBFS, so with CEILING under 0 the CATCH after the clip was limiting on every hit (1–3 dB at −1 … −3 dBTP, and a −26 dB null against the corrected output). Now it adds CEILING − THRESHOLD and the CATCH only meets the clip's own overshoot (about 0.5 dB). Projects and the Peak Control presets with LINK on and CEILING under 0 lose that extra limiting and sit a fraction of a dB quieter.

  • A bug sweep (2026-10-05). Several fixes change how saved projects and presets sound; those are marked.

  • Sound:

    • Switching TP, OVERSAMPLING, AA or the engine and back within a few milliseconds (a fast A/B, automation) could leave the output silent until the next such switch. A second switch during a restart no longer jumps back to full level either.
    • TRUE PEAK at 352.8 and 384 kHz no longer crashes the host.
    • SUSTAIN works: it did nothing before. Positive fills a hit's tail, negative tightens it, a held note is left alone. ATTACK no longer lifts held notes (about 2 dB at 100 %) and acts on onsets only. Projects and presets using ATTACK or SUSTAIN sound different (128 Techno Master among them).
    • Switching TP no longer clicks or replays old audio.
    • BYPASS is a 10 ms crossfade and never replays stale audio on the way in or out. The processing keeps running while bypassed, so BYPASS no longer saves CPU.
    • DELTA plays exactly what the processing removed in every engine: BANDS no longer carries the crossover's phase, SPECTRAL includes what the bins took, and ATTACK / SUSTAIN are inside it. Renders of DELTA change.
    • At 1× with AA on, the clip path ran one sample late, which combed DETAIL (−2.5 dB at 5 kHz with nothing clipped). The latency is one sample longer and the highs are back.
    • INPUT, EDGE, THRESHOLD, OUTPUT (with LINK's makeup) and CEILING glide across each buffer instead of stepping, so automation and knob moves no longer zipper. Static settings render exactly as before.
    • LOOK-AHEAD moves no longer click on small buffers or let peaks past the ceiling while they settle; a move landing during a restart takes effect.
    • Baking MATCH's gain into OUTPUT (a click on the gain) no longer dips the level for about a second. While bypassed the gain reads 0 and the click does nothing, so the held gain is never thrown away.
    • DETAIL switched in SPECTRAL crossfades instead of dropping out for 50 ms.
    • One NaN or infinite input sample no longer silences the output for good or freezes the meters and MATCH.
    • Dither: left and right get independent noise, and with WALL on the noise never takes a sample over CEILING.
    • With AA off, the oversampler lost 0.05 dB per 2× stage; it now passes level exactly.
  • SPECTRAL:

    • Under its ceiling SPECTRAL is now transparent. Its window left every frame (N−1)/N short (a −60 dB difference against the input at 1024) and the bins read as low; the periodic window it uses now is exact. Every SPECTRAL setting sounds very slightly different.
    • Coming back to SPECTRAL starts clean: old bin gains used to duck quiet material for up to half a second.
    • 512 HITS switched off or on mid-play no longer clicks or replays the last hit.
    • SHAPE's release is continuous across its range; the first fraction of a percent no longer jumps. Presets with SHAPE between 0 and 100 % release differently (128 Techno Master among them).
    • ADAPT with 512 HITS sounds the same at every buffer size, and very large offline buffers now match playback.
  • Presets, A / B and INIT:

    • A preset or A / B slot that doesn't name a setting gives it its documented default instead of keeping the previous preset's. The factory presets spell out every value (128 Techno Master: DEPTH 100 %, SCALE BARK, TP MARGIN 0.3 dB).
    • DELTA, SCOPE SYNC and the division are no longer stored in presets or A / B slots, and switching them no longer marks the preset edited.
    • A preset load or an A / B switch clears the band solos; INIT resets everything, monitoring included.
    • A preset file renamed in Finder (its file name no longer matching the name inside) loads, renames and deletes again. A failed load stays on screen and ‹ › steps past it.
    • A load sends only the settings that change, so a host that keeps an undo step per change records a handful, not about 60.
  • Host:

    • ENGINE, OVERSAMPLING, WINDOW, ADAPT SCALE, DITHER, TP MARGIN and SCOPE DIVISION show names in the host ("4×", "1024", "BARK") and accept typed names; automation lands where it did.
    • SYMMETRY, ATTACK and SUSTAIN no longer show "-0 %".
    • The editor reopens at its saved size and layout (COMPACT or expanded); windows saved by Clipper 1.0.0 are converted.
    • Projects from before TP MARGIN keep 0.1 dB in the parameter itself from the moment they load.
    • Two open Clipper editors no longer overwrite each other's settings.
  • Editor:

    • A typed value is committed before whatever you click next acts (a scope line, A / B, presets, another value), and a card opened while typing takes the keyboard.
    • GR HISTORY shows the clip + catch reduction like the GR readout, independent of OUTPUT, LINK and MATCH. With LINK on it used to show about 1 dB while clipping 12.
    • CEILING reads dBTP with TP on and dBFS otherwise, and is dimmed when nothing uses it (WALL, TP and LINK all off). OUTPUT shows LINK's makeup beside its own value, in amber.
    • Controls that do nothing in the current setting are dimmed: SHAPE and DETAIL in BANDS, 512 HITS at WINDOW 512 or with GATE off, SCALE with ADAPT off, the CATCH knobs with WALL off, the scope division with SYNC off.
    • OFF, FLAT and CURVE readouts switch exactly where the sound does.
    • BIN GR holds between frames and includes the 512 HITS path; the strip's region labels show their real reduction past 12 dB; the DETECTOR view never mixes two blocks; the BANDS strip has its own tooltip.
    • With no audio running, the scope redraws on its toggles, activation completes and the DEMO badge updates; the display no longer freezes while you type.
    • Every gesture the editor opens with the host closes: a knob, line or split whose release was lost (outside the window, the Windows size loop) stops following the pointer at the next click.
    • The footer's readouts refresh at a steady 10 Hz; the CUSTOM wave's hex field follows the WAVE choice; RESET UI SETTINGS resizes the window the way a SCALE change does.
    • Tooltips and the manual say what WALL (sample peaks) and TP (true peaks) each hold.
  • The screen is lit: the waveform sits in a window of deep Techne blue, lit softly from behind, its corners falling into shade; the grid and the labels are its white print, and the trace floats over the face on a soft shadow. The meters and the readouts stay on black, under one glass. SETTINGS → SCREEN: LIT (the default) or CLEAR, the black glass as before.

  • A matte finish: the control plate and the footer lit as solid surfaces with their edges following the rounded corners, deeper shadows under the knobs, and the screen set into a cut in the case instead of standing on it, with clear glass over the data.

  • CLAP: a damaged project no longer takes the host down with it — a state the plugin cannot read is refused — and after a project loads the host is told to read the parameters again, so its automation lanes and displays show the loaded values.

  • THRESHOLD's ring loses the small mark at the top of its scale (−30 dB, where no clipping threshold sits).

  • The editor opens COMPACT — the controls and a small screen, the full display one click away (EXPAND) — and remembers the layout with the project. The presets card fits the compact window: the tags scroll sideways on one row and the list takes the height that is left, so SAVE and LOAD are always in reach.

  • The finish: a brushed control plate, round caps with a mark at the start of their travel (the two-sided controls — SYMMETRY, ATTACK, SUSTAIN, INPUT, OUTPUT, TILT — a mark at their centre instead, and they fill from it), and every switch a shallow key with its own face, so a switch that is off still reads as something to press. Group titles in the ink with a short accent rule; values brighter, units quieter.

  • SETTINGS: CAP — THRESHOLD's cap colour (the house blue, the wave's colour, graphite, or any colour).

  • The scope draws the wave as one line through every column's two extremes in the order they happened, four columns a pixel, tied to the audio's own timeline: slow content is a thin line with exact peaks, content faster than the pixels packs into a solid block whose edge is the true envelope, and a hit keeps its shape as it scrolls. The comb-like attacks, the spikes every seventh pixel and the doubled contour are gone. A LEVEL switch in VIEW shows IN and OUT as peak envelopes with the reduction on top instead — the limiter-style history — kept with the project. The GR history's 20 ms hold is now measured in audio time at every window width.

  • The editor's art-direction pass: the knobs are shallow matte discs (one light from the upper left, a defined edge, a short contact shadow), THRESHOLD is the largest control with EDGE and CEILING a step over the rest, and CLIP · TRANSIENT · LEVEL sit on one control surface with a seam between them. Same controls, same order, same values and behaviour.

  • The material pass: the editor as one instrument under one light — a slate chassis with a fine grain, the control plate lifted off it with every page (MAIN, CATCH, BANDS, SPECTRAL) on it, the caps in sockets with tick marks and a glow under the value arc, THRESHOLD as a large blue cap with a graduated scale, rounded keys that go solid when engaged, the switches on a bezel band with the model name, DEMO as a lamp, the meters as LED ladders, and the display as a framed glass screen with a recess, a faint reflection, a bloomed trace, a scale in both halves and the line labels' values in the ink. THRESHOLD's cell sits on its own recessed panel; each group's title runs into a rule. The screen stays dark glass in the light theme. The scope's default wave colour is now orange; the previous grey and the accent blue are stock choices beside WHITE and CUSTOM, and a saved choice keeps its meaning. The IN meter is neutral, OUT takes the wave's colour. TECHNE_MATERIAL=current shows the editor as it was.

  • The reference-matching pass (the A4 display study measured against the editor at 2 ×): the caps are plain discs with one thin rim — no socket, no tick marks, no arc at rest (the arc shows only under the hand); THRESHOLD's cap a hair larger with a lit top edge and a bevelled bottom, its well square-bottomed and flush with the plate's edge, dark in both themes, with room over and under the graduations; the keys of the header and the footer 31 px tall with a bright top line, PRESETS a bordered key; the display's frame a fine rounded line with a shadow on the chassis and no black lip under the screen; the tabs sit on the plate; the footer band the study's height with a lit top edge; the readouts' units follow their values; CATCH's dials start at the left.

  • The scope's trace: the bloom a halo within three pixels, the contour 1.2 px.

  • Dark-theme materials: one light from the upper left — the control bank a shallow gradient with a fine top edge and a short shadow beneath, the knob faces a clear step above it with the rim lit toward the upper left, a quieter inactive track, and a restrained recessed edge on the scope. The light theme is unchanged.

  • THRESHOLD's ring is a meter: 24 nodes light up to the level entering the clipper, on the knob's own scale — pale blue below the threshold, amber past it, a lamp past 0 dBFS — with the threshold as a fixed tick in line with the cap's dot. In every engine: in SPECTRAL it shows the bin furthest over its own ceiling on THRESHOLD's scale. The audio is unchanged.

  • The SPECTRAL page in three groups on the plate, like BANDS: ANALYSIS (WINDOW, GATE, 512 HITS and the BIN GR reading), FREQUENCY (TILT, ADAPT, SCALE), DYNAMICS (ATTACK, RELEASE, SHAPE, DEPTH); its dials on the same line as BANDS', the page centred on the plate. Its selected keys are the house blue (they were lavender); its arcs, titles and the strip's curve a lighter blue. The small knobs' pointers are one cool off-white.

  • Light theme: THRESHOLD's scale marks and end numbers are readable on its dark well; the COMPACT mini screen has a dark frame.

  • TRANSCODER's label whole in a 940 px window.

  • COMPACT: the display folds away for a shorter window, a small scope with IN / OUT / GR and OUT MAX in the footer (a second footer row in narrow windows); EXPAND gives the window its size back. Same knobs, pages, engine and values in both. The footer's TECHNE CLIPPER name is gone (the header carries it).

  • The scope's transient heads: a burst faster than the columns (a kick's 180 Hz head at 1.95 ms a column) drew as a ladder with dark notches, because the contour joined column extremes that were boundary cuts, not peaks, and the pixel buckets unioned two columns into nearly every pixel. Pixels that hold most of a cycle now draw as the bars they are, at every scope height, and the contour breaks at them; the buckets partition the columns.

  • The BANDS page names each band by the same edges as the strip (20 Hz and 20 kHz at the ends; it said 40 Hz and 16 kHz). The bank's and the strip's scale numbers are a step darker in the light theme.

  • SPECTRAL sub-bass: the transient gate no longer fires on bass-note onsets or on steady bass with unresolved harmonics, and the 512 HITS hold no longer depends on the host's buffer size. Measured on kick + sub handoffs and F1–A2 riffs; the fundamental and the kick body are unchanged, the onset overshoot is gone.

  • DEPTH: how much of the bin attenuation SPECTRAL asks for is applied, 100 % = as before. Per region too: click a region's name on the strip and the knob sets that region's own depth.

  • The strip's DETECTOR view: the estimate each bin is judged by, the effective threshold (THRESHOLD × TILT × ADAPT), the overshoot above it and what the long path applied, on a log axis. Left of the dimmed edge nothing is measured.

  • TP MARGIN: 0.1 or 0.3 dB under CEILING for the true-peak stage; new instances use 0.3, old projects keep 0.1.

  • SCALE: ADAPT's band layout — BARK, MEL, ERB, LOG.

  • The TP stage detects with the BS.1770 interpolator and applies its gain at the base rate; its detector vectorizes (six stereo instances at 48 kHz / 256 from 85 % of the callback to 32 %).

  • GR and the scope compare aligned taps; the display contract is written down (docs/display-contract.md).

  • The finish: the meter bank keeps its IN / OUT / GR names at every height; the bank's numbers, the scope's amplitude numbers and the strip's frequency and level numbers one contrast step up (9 px, 45 %); a legend in the scope's lower left names what is drawn in each mark's own colour — IN, OUT (DELTA under DELTA), REMOVED where it is drawn, GR HISTORY with its 0–12 dB range; THRESHOLD's name and value one step up and in the ink; the SPECTRAL strip's HITS / GATE status has its own place before the view selector; the line labels' plate is near opaque so CEILING stays readable inside the reduction band.

  • The display, an art-direction pass: a vertical IN / OUT / GR meter bank beside the scope, aligned to its 0 dB lines, with held peaks, the OUT maximum as its own mark and GR on a 0–12 dB scale; the footer in a reading order (GR largest, CATCH quiet until it works, LUFS S and I named apart, IN and the maxima under the bank), units quieter than values, a dash where nothing has been measured and −∞ for silence, numbers refreshed at 10 Hz beside fluid bars; the waveform lighter (a 1 px contour over a 14 % body, the input at 10 %), the grid quieter, the GR numbers out of the scope's gutter; THRESHOLD and CEILING read on one plate when they coincide instead of at opposite edges.

  • Three factory presets built on SPECTRAL as a peak controller (THRESHOLD down, no EDGE, LINK makes the level up, DETAIL off, ADAPT 0, TP on): Drum Bus, Mix Bus and Sub Heavy Peak Control. Measured at equal loudness against the dry the drum loop keeps its kick within 0.15 dB and its sub within 0.1; the mix stays within 0.5 dB in every band.

  • MATCH in the header: a loudness-matched bypass. The output rides a slow gain that holds its short-term loudness at the input's, so BYPASS compares the processing at equal loudness; the gain reads beside the switch and a click on it bakes it into OUTPUT. Held while bypassed; off under DELTA; switching it resets OUT MAX / TRUE PK MAX. Off, the audio is byte-identical to before.

  • OUT MAX and TRUE PK MAX hold the largest peak since the last reset, with the editor closed too; click to reset; switching TP resets them. LUFS click restarts the integrated measurement only.

  • The activation card: DEMO as a small amber badge, labels above the fields, red only for an activation that failed.

  • The CUSTOM wave color typed as hex is kept exactly. The default wave is a plain gray; the input trace is a soft envelope, the output the one crisp line.

  • The visual pass: neutral grounds, flat knobs, borderless controls.

  • Windows: the editor opens at the right scale in Live (Auto-Scale), Reaper and Bitwig; header segments never wrap.

Techne Tube 1.3.0

#
  • The editor in the family's design (Techne Scope's, Techne EQ's and the Clipper's): the same layout — the header, the FIELD with its meters and readouts, TONE · STAGE over HARMONICS · LEVEL, the switch row — on the dark CHARCOAL screen and one plate of the family's dials (DRIVE the hero, its ring lit up to the setting, reaching with the input and turning amber as the tube bends), with cream chips, lamp keys and an info line that names the control under the pointer, what it is set to and what it does. The whole board scales with the window. PRESETS is the family's browser (search, kinds, favorites, descriptions, SAVE AS with author and tags) and SETTINGS the family's card, with SET AS DEFAULT for new instances. SETTINGS → DESIGN → CLASSIC brings back the console editor, and its own SETTINGS → DESIGN → FAMILY returns. The board keeps its own window size in the project (a 1.2 project's console window does not shrink it) and opens new instances at the SCALE chosen on this machine.
Full notesHide full notes
  • Typing a value back in takes what the editor prints (a true minus, and FLAT for ORDER); Esc or a click outside closes a half-filled SAVE AS or a rename before the browser itself; a deleted preset leaves the header; a custom WAVE colour reaches the whole FIELD at once.
  • Fixed: the harmonics (EVEN / ODD / ORDER) turned harsh almost as soon as they came in, and worse with DRIVE. They are rebuilt as saturation — a soft clipper for ODD, a soft rectifier for EVEN, ORDER the hardness — in place of the Chebyshev table, which folded back on itself at high EVEN or ORDER, gave a quiet track or a decaying note the full amount, and at ORDER's middle put the 5th harmonic level with the 3rd. Now the curve never folds, the harmonics fall off with order, quiet material and tails come out cleaner, the first 10 % of a knob is gentle, and MAKEUP gives back the level the harmonics take. A project that uses EVEN / ODD sounds different when it opens (that is the fix); one with both at zero renders exactly as before, and the tube keeps the law it was saved with.
  • SETTINGS → ENGINE is gone: the DSP choice (CLASSIC · SAG FIX · CONTINUOUS) was there to compare engines and is settled. Old projects and presets still load the tube they were saved with.
  • Demo (unlicensed): the output drops out for 5 s every minute after one clean minute (was 2 s of noise every 30 s, the first at 90 s), with 10 ms ramps so no edge clicks.

Techne Tube 1.2.1

#
  • The macOS installer's pages name the Audio Unit: the welcome lists all three formats and where they go, and the last page tells Logic Pro and GarageBand users that the Audio Unit is what they load. 1.2.0 installed the component but its pages still said VST3 and CLAP.
  • Known in this version, as in 1.2.0: GarageBand's out-of-process hosting keeps space and letters in the plug-in once it has been clicked, and Return after a typed value restarts the song there. Other hosts are unaffected.

Techne Tube 1.2.0

#
  • Audio Unit. The Tube is an AUv2 now, for Logic and GarageBand. The macOS installer puts it in /Library/Audio/Plug-Ins/Components beside the VST3 and CLAP; the Hub installs it from 1.0.3.

  • The console look: the FIELD on a screen with the readouts inside it, the bank as one plate with DRIVE as the hero dial and a ring that follows the signal, the family's raised keys, dials that stay large as the window shrinks, phosphor as the product colour.

  • Every dial writes its value underneath and reads it back as you turn, OUTPUT in dB; a typed value commits on Return and Esc abandons it.

  • Lighter: about 23 % less CPU at the default settings and 45 % at heavy ones, the oversampler three times faster — the audio unchanged to the bit.

  • Windows: opening the editor no longer stalls the host, and COMPACT / EXPAND and HIDE / SHOW no longer stretch the window while it resizes.

Full notesHide full notes
  • STEREO · MID · SIDE (now captioned APPLY TO) sends the whole Tube to the part you choose: DRIVE, WARMTH, AURA, SAG, the harmonics, INPUT, MAKEUP and OUTPUT work on the mid or the side alone, and the other part passes through untouched. Before, only the EVEN / ODD harmonics followed the switch and the tube saturated both channels, so SIDE still colored a mono signal. Projects saved on MID or SIDE will sound different.

  • REAPER on macOS: opening the Tube could crash REAPER when it refused a window size the plugin asked for before the window was placed (the resize and its undo called each other until the app ran out of stack).

  • CLAP: a damaged project no longer takes the host down with it — a state the plugin cannot read is refused — and after a project loads the host is told to read the parameters again.

  • Known in this version: GarageBand hosts plug-ins out of process, and while the Tube has the keyboard there, space and letters stay in the plug-in and Return after a typed value also restarts the song. Logic, Live, Bitwig and REAPER are unaffected. The next update addresses it.

Techne Tube 1.1.5

#
  • ⌘A selects all in the activation card's fields on macOS. The plugin's field now sees ⌘-shortcuts before the host's menu while it has the keyboard; anything it doesn't use still goes to the host.
  • While a card is open (activation, presets, SETTINGS) or a value is being typed, every key stays in the plugin: Tab moves between the fields without switching the host's view, Esc closes the card. Close the card and the host has its keys back.

Techne Tube 1.1.4

#
  • A device removed on your techne.fm Devices page, or a refunded purchase, now reaches the plugin: it asks techne.fm once per load and then hourly whether its activation still exists, and drops the license only on a definite no. Offline, the license stands.
  • Tab and Shift-Tab move between the activation card's fields (and the preset browser's and SETTINGS'); the host keeps Tab otherwise.
  • An activation from the plugin names the device on your Devices page the way the hub does, instead of showing its id.

Techne Tube 1.1.3

#
  • Typing and pasting into the activation card work again, on Windows and macOS. The card takes the keyboard while it is open and gives it back to the host when it closes. The same for the preset browser and SETTINGS.
  • Activation and deactivation give up after 20 s instead of hanging when techne.fm does not answer.

Techne Tube 1.1.1

#
  • DEACTIVATE frees the machine on your techne.fm account, not just this computer. Offline, the license stays and the card says so.
  • A license removed mid-session is a demo at once, not after a fresh five minutes.

Techne Tube 1.1.0

#

The first public baseline. A 1.0.x session or preset loads safely; its OUTPUT automation lane reads differently (the range grew), which is intentional.

  • MAKEUP: a fixed gain from the curve that puts a full-scale sine back to the level it had at DRIVE 0, so pushing DRIVE no longer just gets quieter. Exactly 1 at DRIVE 0; not loudness matching. On for new instances; its value sits beside the switch.
  • CLIP: a hard clip at 0 dBFS as the last thing on the output. Sample peaks only. On for new instances.
  • OUTPUT reaches +12 dB (was 0). DRIVE opens at 10 % (was 65 %).
Full notesHide full notes
  • DSP revision 3 for new instances: the continuous stage loop (no click when DRIVE crosses a stage), SAG on the stages' drive, AURA's slew read at a 48 kHz reference so it sounds the same at every rate, a 10 Hz DC blocker on the tube's output. Sessions and presets keep the revision they were saved under (SETTINGS → ENGINE → DSP).
  • The FIELD pulses with the saturation.
  • OUT MAX and TRUE PK MAX hold the largest peak since the last reset, with the editor closed too; click to reset. LUFS click restarts the integrated measurement only.
  • The activation card: DEMO as a small amber badge, labels above the fields, red only for an activation that failed.
  • The CUSTOM wave color typed as hex is kept exactly (it used to keep the hue only). The default wave is a plain gray.
  • The visual pass: neutral grounds, flat knobs, borderless controls.
  • Windows: the editor opens at the right scale in Live (Auto-Scale), Reaper and Bitwig; header segments never wrap.
  • Knobs under two fingers: a trackpad swipe moves a knob the same distance a drag does, the arc follows the hand even where the host echoes edits slowly, a flick no longer slams the knob to the end, and the way back from MIN or MAX starts at once.
  • The transfer curve popup sits in the FIELD's free corner while DRIVE, WARMTH or MODE move, never over the header.
  • A click no longer takes the keyboard from the host; typing a value does, and gives it back. Live's computer MIDI keyboard keeps playing while a knob is dragged.
  • A license the hub activates or deactivates takes effect in every open instance within a few seconds, without reloading.