1.0.0
Latest #The first release: a transient envelope shaper. Every hit starts an envelope that reshapes it — shorten a drum loop's hits and keep their front, gate a room, let each hit's brightness fall on its own — and the same hit can key a crush, a carrier's texture or an echo.
- TRIGGER: the hits detected in the input (TRANS, with SENS, GAP and the detector's own high-pass), the host's grid (1/4, 1/8, 1/16), the sidechain input (SC) or MIDI notes.
- AMPLITUDE: the gain envelope — LENGTH (1 ms to 4 s, or synced from 1/64 to 2 bars), HOLD, CURVE and SOFTEN, drawn on its screen and set by dragging the handles or the numbers.
- FILTER: a low-pass that falls from OPEN to REST over its own envelope, with RESONANCE and a 12 or 24 dB slope.
Full notesHide full notes
- The chain: AMPLITUDE and FILTER are the first stages of up to five. CRUSH (the Reducer's RATE, GRID and BRIGHT), CRISP (a carrier's texture: FREQ, CARRIER, AMOUNT, by amplitude or time) and DELAY (TIME, FEEDBACK, TONE; tight times tune it), each keyed by its own envelope to act on the HIT or the TAIL. The order of the chain bar is the signal's path: drag a stage to move it, × to remove it, + Add for the missing ones. LINK runs every stage on AMPLITUDE's timing.
- RHYTHM: CHANCE (per channel with L/R) lets some hits through whole, SPREAD varies each hit's length, SWING moves the grid's off-beats.
- LEVEL: LOW CUT, MIX, IN and OUT.
- The signal strip: the input, the output and the applied envelope over one, two or four bars (or seconds), each hit marked, FREEZE to hold it; IN, OUT and ENV meters.
- The NOTCH look in light or dark with a choice of accent; ten factory presets and your own, with A/B; BYPASS crossfaded and aligned.
- 1.5 ms of latency (the lookahead that keeps each hit's front), plus CRISP's oversampling while CRISP is in the chain; the host compensates.
- VST3, CLAP and Audio Unit (AU code aufx / Tapr / Tchn).
The CRUSH stage is a port of DeRez4 by Airwindows (Chris Johnson, MIT), credited in THIRD_PARTY_NOTICES.txt.